Contents: Low-frequency front door speakers ⬇ High-frequency front door speakers ⬇ Low-frequency rear door speakers ⬇ Low frequency speakers in the rear…⬇ High-frequency rear door speakers ⬇
Screws for fastening the LF (lower) and HF (upper) speakers of the front door (zafira models)
Low-frequency front door speakers
1. Remove the door interior trim panel (see Chapter Body).
2. Remove the mounting screws and remove the speaker from the inner panel (see illustration Screws for fastening the LF (lower) and HF (upper) speakers of the front door (zafira models)).
3. Disconnect the electrical wiring from the speaker.
4. Installation is carried out in reverse order.
High-frequency front door speakers
1. On astra models carefully remove the triangular decorative cover from the base of the door rearview mirror, then remove the foam pad. Disconnect the wiring and remove the speaker from the cover.
2. On zafira models The tweeter can be removed without first removing the trim panel, but there may be problems disconnecting the wiring, the edges may be too short. Using a small screwdriver, pry the speaker out of the panel (see illustration Screws for fastening the LF (lower) and HF (upper) speakers of the front door (zafira models)), then disconnect the electrical wiring from it. If the wire is not long enough, you will have to remove the trim panel (see Chapter Body).
Material was taken from a resource (Opelbook.ru)
3. Installation is carried out in reverse order.
Low-frequency rear door speakers
1. Remove the door interior trim panel (see Chapter Body).
2. Remove the mounting screws and remove the speaker from the inner panel.
3. Disconnect the electrical wiring from the speaker.
4. Installation is carried out in reverse order.
Low frequency speakers in the rear side trim panel
1. Remove the rear side trim panel (see Chapter Body).
2. Remove the mounting screws and remove the speaker from the inner panel. Disconnect the electrical wiring.
3. Installation is carried out in reverse order.
High-frequency rear door speakers
1. Remove the door interior trim panel (see Chapter Body).
2. The tweeter is secured to the rear door handle trim panel by three clips. Release the clips and remove the tweeter from the panel.
3. Installation is carried out in reverse order.
Visitor comments