1. Put on protective gloves and gently press on the upper inner (1) corner of the glass until the lower outer corner (2) protrudes. If necessary, help yourself by prying the corner (2) with a screwdriver. The upper inner fastener can be released by prying it with a small screwdriver, inserting it into the hole in the mirror housing.
2. If equipped, disconnect the two wires from the mirror heating element, holding the riveted pins to avoid damaging the structure.
3. If equipped, connect the wiring to the heating element. Install the glass, carefully aligning the plastic clips. Press the glass until the clips click into place.
Original article on the web portal opelbook.ru
Visitor comments