Warning! If the battery is disconnected with the selector lever in position P, the lever will be locked in this position.
1. To release the selector lever, remove the selector lever trim and, using the blade of a thin screwdriver, press the lock lever on the left front side of the selector lever.
2. Move the selector lever to all positions and check that the selected gear is correctly displayed on the selector lever position indicator.
3. Set the selector lever to position P.
4. To access the gear selection cable, remove the battery and battery support.
5. Remove the lockout bracket and release the gear selector cable sheath from the bracket on top of the transmission.
6. Check that the selector lever (1) set to R (2), then move the lever to all positions and return it to its original position. Lock the selector cable sheath by pressing the locking clip until it clicks into place.
7. Install the battery and check the operation of the selector lever.
Visitor comments