Right crankshaft sealing ring
1. Remove the crankshaft pulley.
2. Using the blade of a screwdriver as a lever, remove the O-ring from the chain cover.
3. Clean the sealing ring seat and the sealing surface of the crankshaft.
4. Lubricate the lips of the new O-ring with clean engine oil and, using a pipe driver, install the O-ring.
5. Remove all traces of oil and install the crankshaft pulley.
Left crankshaft seal
6. Remove flywheel.
7. Drill two small holes in the end of the o-ring, screw in two self-tapping screws, and use pliers by the screw heads to pull the o-ring out of its socket.
8. Clean the sealing ring seat and the sealing surface of the crankshaft.
9. Lubricate the lips of the new O-ring with clean engine oil and, using a pipe driver, install the O-ring in place.
10. Install the flywheel.
Visitor comments