1. Seal
2. intake manifold
3. Thermometer
4. Seal
5. Check valve
The intake manifold must be removed, for example when working on the injection system.
Removing
1. Remove the engine shield and muffler exhaust pipe.
2. Remove the intake manifold from the cylinder head.
3. To do this, remove the charge air thermometer cable, the vacuum hose from the non-return valve, and the bottom of the intake manifold.
4. Unscrew the intake manifold from the cylinder head and holder and remove the seals.
5. Do not unscrew the seal for the non-return valve.
Installation
1. Screw the intake manifold onto the cylinder head with a force of 25 N.m, replace all seals.
2. Screw the oil filter housing support and the return pipe with a force of 25 N.m.
3. Install the engine shield and muffler exhaust pipe.
Visitor comments