The tank is located in the engine compartment. It has two chambers, one for each brake circuit. The screw cap has an opening that must always be open.
The reservoir is transparent, so you can check the brake fluid level at any time. The brake fluid level must lie between the -max- and -min- marks. Add only fresh original brake fluid from the company.
Due to the wear of the front disc brakes, the brake fluid level is slightly reduced. This is fine.
If the brake fluid level rises strongly in a short time, this indicates a brake fluid leak.
The leak must be found immediately. As a rule, this is due to wear on the cuffs of the wheel brake cylinder. For the sake of safety, the brake system should be checked by a specialist workshop.
Visitor comments