As a spare part, two different right mirror housings can be supplied, the individual elements of which are not interchangeable. Therefore, when buying, you should take the old part with you to the store.
1. Remove the adjustment lever in the cabin (with appropriate equipment). Turn out the fastening screw and remove a triangular overlay.
Removal of a triangular overlay of an external mirror
2. Loosen the mirror housing fasteners from the inside while holding the mirror housing from the outside.
Screws of fastening of the case of an external mirror
3. At the appropriate complete set disconnect a socket of the electric drive adjustment of a mirror.
4. Remove an outside mirror.
5. Installation is carried out in the reverse order.
Visitor comments