Removing
1. Squeeze the mirror out of the body with a wide spatula In order not to damage the mirror body, place a rag or cardboard underneath. The mirror can be removed by pressing it from the outside and pulling it out from the inside with your fingers. In this case, the window should be opened.
Removing the mirror
2. If there is mirror heating, disconnect its connector.
3. Turn out the e/motor of a drive of a mirror from the case and separate its socket.
Installation
1. Reinstall the mirror e/motor and secure it while routing the wiring behind the motor. Connect the connector.
2. Before installing a new mirror, lubricate the locking brackets.
3. If there is heating of the outside mirror, connect its connector.
4. Position the mirror so that the locking tabs are over the appropriate holes and push it down. The mirror should lock into place.
Visitor comments