Open the drawer, press the side latches, fold the drawer back and remove.
Loosen the screws and remove the glove box mounting frame.
The fuse numbers are indicated on the back of the fuse box cover.
To replace the fuse, pull the handle towards you (by the arrow) and fold back the fuse panel.
It is recommended to carry spare standard fuses, which are installed in the mounting block, in the place marked in yellow.
The fuse box on the right side contains tweezers for removing a faulty fuse.
Before replacing a fuse, turn off the corresponding switch and ignition.
Remove the fuse with tweezers.
A blown fuse can be identified by the melted current filament.
Before replacing, determine the cause of the burnout and eliminate it. The new fuse must be completely consistent with the one being replaced. Insert the new fuse in place of the removed one.
The fuse rating can be determined by the color marking:
| Brown | 7.5 A |
| Red | 10A |
| Blue | 15A |
| Yellow | 20A |
| Green | Z0A |
| Orange | 40A |
Fuses installed in the passenger compartment
Engine compartment fuse box
The fuses for the spark plugs and fuel filter heater are located in the engine compartment (diesel models), as well as other fuses and relays, the purpose of which is determined by the vehicle's configuration. These fuses are located under this cover.
Removing the main fuse box (the block can accommodate up to 8 fuses). Failure of these fuses indicates a malfunction of the main components of the electrical equipment.
Visitor comments