2. At the corresponding complete set open a cowl and disconnect electroconducting from the electric motor of the additional fan of system of cooling located under a forward bumper. Remove the fan assembly from the front of the condenser.
3. On models without an additional fan, remove the front bumper (see chapter Body).
4. Turn out a bolt and disconnect a refrigerant tube from a receiver-dehumidifier.
5. Unscrew the cover of the receiver dryer from the condenser.
6. Remove the dryer receiver, disconnect the electrical wiring and remove the pressure switch in the system.
7. Remove the receiver dryer.
Installation is in the reverse order.
Recharging the air conditioning system must be carried out in a car service workshop.
Visitor comments