2. If equipped, open the hood and disconnect the electrical wiring from the additional cooling system fan electric motor located under the front bumper.
3. Remove the bolts and disconnect the refrigeration tubes from the condenser and receiver-dryer. Disconnect the wiring from the system pressure switch.
4. Unscrew the receiver-dryer mounting bolts.
5. Unscrew the upper bolts securing the condenser to the radiator and remove it from the lower support clamps. Remove the condenser assembly with the receiver-dryer.
6. If necessary, the receiver-dryer can be separated from the condenser.
Installation is carried out in reverse order.
Recharging the air conditioning system must be done in a car service workshop.
Material taken from an internet portal opelbook
Visitor comments