Bottom Air Flow Control Cable
Remove the heating and ventilation control unit from the instrument panel as shown above.
Release the clamps and disconnect the cable from the back of the unit.
Disconnect the cable from the lever on the air distributor housing.
Install the new cable so that it passes freely without obstruction and check the cable fastening.
Install the control unit as described above.
Upper Air Flow Simplification Cable
Remove the instrument panel as indicated in chapter 12. Remove the control unit, release the clamps and disconnect the cable from the back of the unit.
Through the hole in the instrument panel, disconnect the end of the cable from the lever on the air distributor housing.
Install a new control cable.
Install the instrument panel.
Visitor comments