Contents: Removal ⬇ Installation ⬇
Removal
To gain access to the oil radiator for the purpose of removing it, it is necessary to perform the operations specified in chapter 3, or in another way, by removing the front bumper (chapter 11).
After removing the access parts, remove the oil cooler nipples. To reduce oil leaks, plug the pipe openings. If necessary, remove the oil cooler pipes from the brackets.
Unscrew the two nuts and release the oil radiator from the brackets.
Installation
Installation is carried out in the reverse order of removal. After completing the work, check the oil level in the engine and, if necessary, top it up as indicated in chapter 1.
Visitor comments