Disconnect the negative battery terminal.
Disconnect the rear door wiper arm as described above.
Remove the plastic cover from the end of the cleaner spindle, unscrew the spindle nut and remove the gasket.
Remove the facing panel of a back door.
Locate the motor wire connector and disconnect the connector halves.
Remove the two bolts, noticing the location of the ground wires to ground, remove the motor assembly from the rear door.
Installation is carried out in the reverse order of removal, making sure that the rubber mounting gaskets are correctly located in the opening of the rear door, and the ground wires are installed in the same way as before removal.
Visitor comments