Clutch specifications (Opel Vectra C)

Type - Single-disc, dry, with diaphragm spring and hydraulic drive

Driven diameter (friction) disk, mm:

• Z16XE — 200
• Z18XE — 205
• Z20NET/Z32SE/Z19DT(H)/Y22DTR/Y30DT — 240 (SAC)
• Z22SE/Z22YH/Y20DTH — 228

Thickness of new friction linings, mm:

• Z16XE/Z18XE — 7.65±0.2
• Z20NET/Z22SE/Z22YH/Z32SE/Y20DTH/Y22DTR8.4±0.2
• Z19DT(H)/Y30DT — 7.8±0.2

Minimum permissible thickness of the lining over the rivet heads, mm — 1.6

Working (brake) fluid - DOT-4

Tightening force of threaded connections, Nm

Hydraulic line nipple nut - 14

Clutch Master Cylinder Fastening Nuts - 20

ABS modulator mounting bolts - 20

Battery tray mounting bolts - 15

Clutch Master Cylinder Fastening Nuts - 20

ABS hydraulic modulator mounting bolts - 20

Clutch pedal support bracket mounting nuts - 20

Bolts for fastening the brake booster to the engine compartment bulkhead - 20

Clutch basket mounting bolts:

• M7 - 15
• M8 - 28

Clutch slave cylinder mounting bolts - 5

Fastening the clutch dome to the gearbox housing — 28

Transmission to engine mounting bolts - 60

Feeler gauge mounting bolt (AF 23, AF 33) — 20

Filler plug - 40

Feeler gauge mounting bolt - 20

Filler plug - 30

Control bolt (AF40 and CVTronic - VT 20-E) — 11

[Material published on the website www.OpelBook.ru]

Drain plug (F40) - 50

Reverse Light Switch Sensor (F35) - 15

Control plug (F35) - 50

Drain plug (F23) - 35

Filler plug (F23) - 35

Control plug (F17) — 4 Nm + (45° + 135°)

Reverse Light Switch Sensor (F17) - 20