Replacing lamps
Open the hood.
When replacing a lamp, the condition for this work is dexterous hands. On the left side of the car is the battery, on the right is the air filter housing.
Left side: Unlock and remove the battery relay box from the clamps.
Both sides: Turn the turn signal lamp bulb holder slightly to the left and pull it back out of the reflector. Press the bulb lightly into the holder, then turn it to the left and pull it out.
Installation: insert the new lamp in reverse order.
Press the cartridge into the turn signal housing and turn it to the right until it stops.
Dismantling the lamp housing
Open the hood.
Unlock the turn signal housing. To do this, insert a screwdriver between the front spoiler and the headlight and unlock the housing.
Pull the lamp housing forward out of the cutout.
Disconnect the wire connector.
When installing, press the direction indicator housing until the retainer enters the groove.
Visitor comments