1. Perform the following procedures at the intervals given in Section «Maintenance» at the beginning of this guide.
2. Replace the air filter element as described in Chapter 4.
3. Check and adjust idle speed and mixture as described in Chapters 14 or 23.
4. Replace the fuel filter on fuel injected engines as described in Chapter 7. On carbureted models, a fuel strainer is included in the carburetor fuel inlet (see Chapter 16, point 4), it must be cleaned regularly to prevent possible clogging which could lead to insufficient fuel supply.
5. Raise the vehicle and secure it on axle stands.
6. Check the condition of all fuel lines. Also check for leaks.
7. Lower the vehicle to the ground.
8. Lubricate the throttle control cables and throttle mechanism with 1-2 drops of engine oil. Check for correct adjustment of the accelerator cable.
Visitor comments