Disconnect the reversing light switch wire.
GTE: Remove shock absorber from spherical head, unscrew from gearbox cover and remove.
Caution: Do not lose the toothed washer.
Loosen the bolt securing the shift fork rod.
Unscrew the speedometer drive from the gearbox housing.
Loosen the front wheels. Make chalk marks on the rim and hub.
Raise the car. Remove front wheel.
Unscrew the earth cable from the endshield.
Remove pin. Unscrew the right ball joint nut. Remove the ball joint with a standard puller from the right steering knuckle.
Unscrew the stabilizer from the left arm.
Unscrew the left beam from the body. Bolt - Just loosen it. Illustration B2332 shows a short beam.
Press the short beam out of the sleeve using a puller (KM 504).
long beam (SR version, demanding vehicles) screwed without a bushing to the body with 6 bolts.
Attention: Before removing the long beam, make marks on it and on the body, so that you can then install it in the correct position.
Visitor comments