Removing
Set the shift lever handle to the neutral position.
Unscrew the console from the tunnel.
Remove the rubber cover from the switch lever. Pull the lever up.
Remove retaining ring from groove.
Push the growl to the left and take it out.
If it is required to unscrew the damping element with the lever housing from the body. The polymer casing of the lever is destroyed when the damping element is squeezed out. Apply new.
Installation
If removed, install lever cover with damping element and screw to body with 20 Nm.
Lubricate the pin, the ball of the center of rotation and the surfaces adjacent to the casing of the lever with grease (OPEL ET #1946254/90001820).
Fix the shift lever handle in the housing with the ring.
Install the rubber cover on the damping element. The protrusion on the rubber cover points in the direction of travel.
Pull the cover up to the lever tube.
Screw the console.
Visitor comments