Pull the hood release handle on the driver's side under the instrument panel. The hood opens and opens slightly. Push the handle back to its original position.
Approximately a palm's distance to the right of the center of the hood - as viewed from the front - there is a locking hook on the underside of the hood: pull and open the hood.
Note. Dirt or snow on the hood may fall onto the windshield when opened and clog the air intake.
To secure the hood in the open position, insert the support located across the radiator into the longitudinal groove on the underside of the hood.
Press the support firmly into the holder before closing. Let the hood drop into the lock.
Check that the hood is fixed by pulling on the front edge. If the hood is not fixed, repeat the previous operation.
Visitor comments