Removing
Disconnect the wiring harness connector.
Dismantle the door.
Unscrew the fixing screw securing the tape door stop.
Remove the door hinge clamps.
Note. Use high pressure grease to lubricate the clamping sleeves (part number 90 510 336 / part number 19 48 606).
Installation
Install the door.
Adjust the tailgate if necessary.
Note. Observe the installation gap dimensions.
Installation clearances
Note. Gap dimensions refer to lacquered tailgate complete with all fittings.
Replacing the liftgate glass guide
Removing
Remove the tailgate lift window.
Remove the lift window glass guide.
Remove the lift window glass guide from the unpainted portion of the door.
Installation
Install the lift window glass guide.
Insert the lift window glass guide into the unpainted part of the door.
Install the liftgate rear window.
Visitor comments