2. Carefully press the 3 fasteners of the rear edge of the headlining trim.
3. Remove the rear seat lamp shade (with appropriate equipment) (see Section 21).
4. Remove the rear pillar upper trim (C or D) (see Chapter 11).
5. Press the headlining down slightly, being careful not to damage it.
6. Disconnect all antenna wiring connectors one by one (see accompanying illustration), loosen the fastening nut and remove the antenna base from the roof of the car.
[Article posted on Internet portal: opelbook.ru]
33.6. Electrical wiring connectors and fastening nut (1) of the external antenna (corsa C models): 2. Radio receiver connector; 3. Phone connector; 4. Power cable connector; 5. Navigation system connector
7. Installation is carried out in reverse order.
Visitor comments