Contents: Main salon light ⬇ Illumination of instruments and…⬇ Front personal lighting ⬇ Rear interior lights ⬇ Glove box illumination ⬇ Cigarette lighter/ashtray…⬇ Luggage compartment lighting ⬇ Battery protection ⬇
Main salon light
Location of the main salon light
To turn on the lighting in permanent mode, pull the rotary switch that controls the operation of the lighting devices towards you.
Switch for controlling the operation of external lighting devices, instrument lighting and interior lighting
0 Off
The side lights are on
Low or high beam headlights are on
When the handle is pulled out, the interior lighting and instrument lighting are turned on
Illumination of instruments and function switches
The instrument lighting and function switches are activated simultaneously with the daytime running lights.
The backlight of the information display screen is activated when the ignition is turned on, the backlight intensity is adjusted by the potentiometer handle mounted under the handle of the lighting control switch.
Front personal lighting
The front personal lighting lamps are located on both sides of the main interior light and are equipped with individual switches.
Location of front personal lighting lamps and switches
Rear interior lights
The standard arrangement of the rear interior lights with their switches is shown. The left position of the switch corresponds to the off state of the lights, in the right position of the switch the light is on, moving the switch to the middle position switches the light to the operating mode when the rear door is opened.
Standard arrangement of rear interior lights with their switches
Glove box illumination
The glove compartment illumination is activated when the ignition is on and comes on when the lid is opened.
Cigarette lighter/ashtray illumination
The cigarette lighter/ashtray illumination is activated when the ignition is on.
Luggage compartment lighting
The luggage compartment lighting is switched on when the tailgate is opened.
Battery protection
To protect the battery from discharge into the circuit of some power consumers (in particular, interior lighting) a timer is built in, ensuring that they are automatically switched off after 30 seconds.
Visitor comments