Replacing the exhaust system suspension cushions (Opel Astra J)

The rubber mounts of the exhaust system suspension are replaced if, due to damage or excessive deformation, the system elements begin to knock when in contact with the body or other vehicle components.

To replace suspension cushions main and additional mufflers do the following.



1. Unscrew the mounting bolt…



2. …and remove the rear support of the main muffler from its bracket.



3. To replace the main muffler suspension cushions, use a screwdriver to slide the cushion to be replaced from the bracket on the body, then from the muffler bracket…





4. …and remove the pillow.

Note: To make it easier to remove a damaged pillow, cut it with a knife until the holes are visible.

5. Install the new cushion in the reverse order of removal.

Note: To make it easier to install the cushion, lubricate the muffler and body brackets with a soap solution.

To replace suspension cushions inlet pipe do the following.



1. Unscrew the nut securing the intake pipe cushion to the spacer.





2. Remove the cushion support first from the hole in the strut, and then slide the cushion off the intake pipe bracket…



3...and take it off.



4. Install the new cushion in the reverse order of removal.