The car has retractable seat belts for the driver and front passenger.
The same belts are installed for rear seat passengers.
Helpful Hints:
- Check the condition of the belts regularly. If you find frayed, torn or otherwise damaged straps, be sure to replace the straps. If the belts are dirty, wash them with mild soapy water.
- The seat belts can be used to secure the cargo carried in the rear seat from moving.
Attention!
- Never iron the straps.
- Do not use a seat belt on a child sitting on a passenger's lap.
- Be sure to replace belts that have been critically loaded in an accident.
To fasten the seat belt, pull it out of the spool...
...and insert the buckle tongue into the lock until it clicks (fixing the tongue of the buckle in the lock), without twisting the straps.
To unfasten the belt, press the buckle button while holding the belt. Release the belt - it will automatically wind onto the spool.
The car also provides for height adjustment of the front seat belts.
To adjust the position of the belt, press the latch and lower or raise the belt anchor so that the belt does not touch the neck and does not put pressure on the shoulder. To move the mount vertically down, keep the lock pressed.
You do not need to hold the latch to move the belt mount up.
Note. After completing the adjustment, make sure that the belt holder is fixed in one of the positions provided for by the design. To do this, without pressing the latch, pull the belt down: if it was not fixed, it will move down to the nearest fixed position.
Visitor comments