Warning! Adjust the driver's seat position only when the vehicle is stationary. If, when attempting to adjust while driving, you do not secure the seat properly in the longitudinal direction and it moves unexpectedly, you may lose control of the vehicle.
To adjust the front seat in the longitudinal direction, pull up the locking lever handle and move the seat on the runners to a comfortable position. After installing the seat, lower the handle and move the seat back and forth slightly until it is securely fixed.
To adjust the backrest tilt, turn the handle at the base of the backrest, on its left side, up, set the backrest to the required position, release the handle and move the backrest slightly forward and backward until it is securely fixed.
The seat cushion height adjustment lever is located on the left end of the seat.
If you need to raise the seat cushion, lift the lever up and release it. This will raise the cushion slightly. Repeat the operation until the cushion is in the most comfortable position.
If you need to lower the seat cushion, push the lever down and release it. This will lower the cushion slightly. Repeat the operation until the cushion is in the most comfortable position.
The front seat headrests can be adjusted in height: press the locking button located on the side of the headrest and move the headrest up or down to the desired height. The optimal position of the headrest is considered to be such that its upper edge is located at the same level as the top of the head.
Note: For very tall people, raise the headrest to the highest position; for very short people, lower the headrest to the lowest position.
Visitor comments