You will need: keys «at 15» (two), «at 18» (two), «at 21», drill.
1. Install the car on a flyover or inspection ditch.
2. Turn out..
3.... and remove the bolt securing the torque rod to the trailing arm.
4. While holding the bolt from turning, unscrew the nut that secures the torque rod to the rocker arm..
5.... and remove the bar.
6. Remove the second torque rod in the same way.
7. Turn out two bolts of fastening of a crossbeam of the Watt mechanism..
8.... and remove it.
9. Drill out the rivets securing the thermal screen and remove the thermal screen.
10. While holding the bolt from turning, unscrew the rocker arm nut and remove the rocker arm.
11. Install the removed parts in the reverse order of removal.
Visitor comments