Air valve
Remove the top cover in the trunk to access the air valve.
Release all pressure from the system.
Remove the cap and sleeve from the valve, then press on the bosses and push the valve down, being careful not to damage the air line.
Unscrew the air duct fittings, then remove the valve from the vehicle
Installation is carried out in the reverse order of removal. After finishing the work, restore the pressure in the system and check for air leaks.
Air ducts
To remove the air duct, you must first relieve the pressure in the system.
The article was published on the website (Opelbook.ru)
Loosen the fittings on the shock absorber and air valve, then disconnect the air line from the clamps on the underbody.
Installation is carried out in the reverse order of removal, however, after finishing work, restore pressure in the system and check for air leaks.
Shock absorbers
Removal and installation of shock absorbers is carried out as indicated earlier in the section "Rear shock absorber" this chapter.
Visitor comments