Removing
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Remove the steering column trim (see «Facing of a steering column - removal and installation»).
3. We recess the steering column cover, squeeze the two latches and remove the switch from the connector.
4. Press the two latches...
... and disconnect the wiring harness block from the switch.
Comment. On vehicles equipped with a cruise control system, you must also disconnect the additional block of the wiring harness.
5. Similarly, remove the right steering column switch.
Examination
Checking the steering column switches consists in checking the correct closure of the contacts in various switch positions. Switches are non-repairable and must be replaced in the event of a malfunction.
The pin numbers of the pads of the left steering column switch are marked on its body
Table 14.15. Scheme of closing the contacts of the left stalk switch
The pin numbers of the right stalk block are marked on its body
Table 14.16. Scheme of closing the contacts of the right stalk switch
Installation
Install the steering column switches in reverse order.
Visitor comments