Removal and installation interior rear view mirror (Opel Vectra C)

1. On models not equipped with a rain sensor, to remove the interior rearview mirror, you need to press the locking clip with a screwdriver (see accompanying illustration) and remove the mirror from the holder. To install, insert the mirror into the holder guides and push it until it locks.



2. On models equipped with a rain sensor, the battery must first be disconnected (see Chapter 5).

3. Separate the halves of the rain sensor cover and remove them (see accompanying illustration). Disconnect the rain sensor and mirror dimming device wiring connectors.



4. Pull the mirror down forcefully from the holder (see accompanying illustration).





5. Installation is carried out in reverse order.