Removing
1. Remove the oil pan.
2. Unscrew the bolt 2 fastening the sprocket 1 and remove it from the oil pump shaft (see illustration).
3. Unscrew the bolts 4 and remove the oil pump 3 (see illustration 14.2).
Installation
Attention! When replacing the oil pump, install a new seal on the oil supply line.
4. Install and fix the oil pump on the cylinder block, the tightening torque of the mounting bolts is 23 Nm.
5. Install the drive sprocket on the pump shaft, having put the chain on it first, and fix the sprocket with a bolt with a force of 24 Nm.
6. Reinstall the oil pan.
Visitor comments