Camshaft sprocket
Removing
1. Remove the timing belt.
2. Lock the camshaft sprocket.
3. Unscrew the sprocket bolt and remove the sprocket.
Installation
1. Inspect the camshaft oil seal and replace if necessary.
2. Slide the sprocket onto the end of the camshaft, aligning the dowel pin (1) and a hole in the star (2), and tighten the bolt.
Crankshaft sprocket
Removing
1. Remove the timing belt.
2. Stop the crankshaft.
3. Remove the sprocket bolt and remove the sprocket. You will need a new bolt during installation.
Installation
Insert the key into the shaft, put on the sprocket and tighten the bolt.
Tensioner
Removing
1. Remove the timing belt.
2. Unscrew the mounting bolt and remove the tensioner.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments