Single shaft (SOHC) engines and twin-shaft 2.0 l
1. Disconnect the battery from the ground.
2. Disconnect the wires from the ignition unit (see photo), unscrew the screws and remove the block (see photo).
Engines 1.4, 1.6 and 1.8 liters
3. Remove the upper engine cover by unscrewing the screws and removing the oil filler plug.
4. The ignition block is located between the camshaft housings. Disconnect the connector on the left side of the block (see photo).
5. Remove the screws and remove the block from the candles (see photo). On 1.4 and 1.6 liter engines, screw M8 bolts into the threaded holes in the upper part of the block and remove the ignition unit by these bolts (see photo).
Visitor comments