Replacing fluid in the hydraulic drive of brakes and clutch
The procedure is similar to removing air from the brake hydraulic system (see Chapter 6 and Chapter 9). Before replacing the fluid, suck out the used fluid from the feed tank with a rubber bulb or syringe, then pour in fresh fluid. When removing air from the brake line circuit (or clutch circuit), it is necessary to pump out the used liquid, fill in fresh liquid and perform the actions discussed in Chapter 6 and Chapter 9.
Replacing the remote control transmitter battery
The battery is located in the ignition key. The procedure for replacing the battery is discussed in Chapter 12. It should be taken into account that the battery should be changed no more than 3 minutes before, otherwise the control unit will need to be reprogrammed.
Replacing the coolant
The procedure for replacing the coolant is discussed in Chapter 3.
(Material was taken from a resource: «Opelbook.ru»)
Visitor comments