Clutch
Type - Single-disc, dry, with diaphragm spring and hydraulic drive.
Driven diameter (friction) disk, mm
|
Petrol models |
|
|
Models with 1.4 and 1.6 l engines |
200 |
|
Models with 1.8L engine |
205 |
|
Models with 2.0L engine |
216 |
|
Diesel models |
|
|
Models with 1.7L SOHC engine |
200 |
|
Models with 1.7L DOHC engine |
205 |
|
Models with 2.0L engines |
228 |
Thickness of new friction linings, mm
|
All models |
7.65 |
Drive shafts
Type - Open, unequal length, open type, with constant velocity joints at both ends.
Torsional vibration damper
|
Distance from outer CV joint, mm |
|
|
Models with 1.4 and 1.6 l engines |
332.0 |
|
Models with 1.7, 1.8 and 2.0 l engines |
310.0 |
|
Type of CV joint lubricant |
Special grease P/90094176 |
Tightening force of threaded connections, Nm
Material copied from this resource OPELBOOK.ru
|
Connection type |
Meaning |
|
Nut of the nipple connection of the hydraulic line |
14 |
|
Clutch Master Cylinder Fastening Nuts * |
20 |
|
Clutch Pedal Support Bracket Fastening Nuts * |
20 |
|
Bolts/nuts securing pedal bracket to steering crossmember |
20 |
|
Clutch basket mounting bolts * |
15 |
|
Clutch slave cylinder mounting bolts |
5 |
|
Fastening the front anti-roll bar to the strut pendants |
65 |
|
Front hub nuts (see text) |
|
|
120 |
|
Let go completely |
|
20 |
|
Pull at an angle of 80° (+ until the nearest cotter pin holes coincide, if necessary) |
|
Bolt of the clamp of fastening of the lower ball joint of the front suspension |
100 |
|
Steering tie rod end to steering knuckle mounting nut |
60 |
|
Torsional vibration damper mounting |
10 |
|
Wheel bolts |
110 |
* Fasteners marked with an asterisk must be replaced.
Visitor comments