At each oil change, replace the seal under the threaded plug of the oil drain hole. Tighten the threaded plug of the oil drain hole firmly enough, but do not overtighten it (45 Nm).
Attention: The oil level should never be higher than the "max" mark.
The oil filter must be changed every 15,000 km, if you drive little, then once a year, in other words, with each oil change.
Screw in the new filter by hand. If the filter cannot be unscrewed by hand, a special key is required (you can use a leather belt). Before screwing in the filter, clean the engine sealing surfaces and lightly lubricate the rubber seal with oil.
In order to better control the engine's performance, it is best to use the same type of oil and, if possible, the same chlorine as was already in the engine for replacement. Therefore, when changing the oil, it is advisable to attach a plate to the engine with the bottom information about the brand and viscosity of the oil.
The use of different grades of oil has an adverse effect on the engine. If possible, oils of the same type should not be mixed. but different grades. If necessary, oils of the same type, the same grade, but with different viscosities can be mixed without hesitation during annual technical inspections.
Visitor comments