You will need: flat blade screwdriver, pliers.
1. Drain the liquid from the cooling system (see Coolant replacement).
2. Loosen the steam hose clamp by squeezing its bent ears with pliers, slide the clamp along the hose..
3.... and remove the hose from the expansion tank fitting.
4. Similarly, remove the fluid supply hose to the radiator of the cooling system from the expansion tank fitting.
5. Squeeze out the retainer of the expansion tank holder with a screwdriver..
6.... remove the latch..
7.... and then the expansion tank from the bracket on the body.
8. Install the expansion tank in the reverse order of removal.
9. Fill with coolant (see Coolant replacement).
Visitor comments