Helpful Hints:
- Use a reputable brand antifreeze that does not contain hazardous methanol.
- When the ambient temperature rises, do not dilute the antifreeze to save money. In addition to an increase in the freezing point, the washing properties of the diluted liquid deteriorate sharply.
Attention!
- The manufacturer does not recommend the use of ordinary water to fill the washer reservoir.
- Freezing of the fluid in the washer reservoir will destroy it.
The filler neck of the washer reservoir is located in the engine compartment on the left..
...behind the left headlight.
1. To replenish the tank, open its cap..
2.... remove the strainer from the neck..
3.... rinse it from dirt and install it in place.
4. Add liquid to the tank to the lower edge of the neck and close the plug.
5. If the washer jet is clogged, clean it with a sewing needle or the thin tip of a button. It can also be used to adjust the direction of the washer fluid jet.
Attention! Use only non-hardened needles or pins to clean and adjust the jet. The broken tip of the hardened needle cannot be removed from the jet hole.
Visitor comments