You will need: flat blade screwdriver, TORX T15 wrench.
1. Rotate the canopy to expose the bracket attachment point.
2. Use a screwdriver to pry off the edge of the decorative trim of the visor bracket..
3.... and remove it, overcoming the elastic resistance of the clamps.
4. Remove the three screws securing the sun visor bracket..
5.... remove the bracket from the hole in the ceiling, disconnect the block of the wiring harness for the lighting of the cosmetic mirror from it and remove the sun visor.
6. If necessary, prying with a screwdriver, fold back the plug of the sun visor holder..
7.... remove the screw securing the holder..
8.... and remove the holder.
9. Similarly, remove the second sun visor and its holder.
10. Install the sun visors in the reverse order of removal.
Visitor comments