1. Remove the generator (see Removal and installation of the generator).
2. Move the generator to a clean workbench and lay it with the pulley down.
3. Turn out fixing screws and remove a plastic cover.
4. Disconnect the electrical wiring and remove the two screws securing the brush assembly.
5. If the brushes are worn or damaged, replace the brush assembly.
6. Clean and check the condition of the working surface of the rotor rings, in case of signs of excessive wear or mechanical damage, replace the generator assembly.
7. Assembly is carried out in the reverse order to the dismantling of the components.
8. In conclusion, install the generator in its regular place (see Removal and installation of the generator).
Visitor comments