Heater control panel — removal and installation (Opel Vectra B)

Removal

1. Using a screwdriver blade as a lever, remove the decorative trim panel from the heater control panel.



2. Remove the heater control knobs.



3. Remove the top screws of the heater control panel.

4. Move the heater control panel up and remove it from the panel.



5. Disconnect the electrical connectors from the rear of the heater control panel.



6. Mark the position of the cables, then release the clamps and disconnect the cables (the arrow indicates the location of the fastening element of the heater control body shell). To completely remove the heater control cables, disconnect them from the heater housing.

Installation

Installation is carried out in the reverse order of removal.

Material copied from this resource: OPELBOOK.ru