Headlight bulbs - replacement
Before replacing an incandescent lamp, switch off the corresponding current consumer and switch off the ignition.
1. Open the hood. When working on the left headlight, remove the battery.
2. Remove the rubber cover on the back of the headlight (see illustration).
3. Press the wire clamp to the side, remove it from the holder and lower it down, see illustration).
5. Press the bulb plug and remove the bulb instead of the plug and the headlight.
6. Install a new light bulb so that the protrusion of the base fits into the groove of the cartridge. At the same time, hold the light bulb only by the base, without touching the glass with your fingers. The light bulb should be inserted together with the connector.
7. Attach the spring clip.
8. Install the headlight rubber cover.
9. Check headlight tilt in workshop.
Visitor comments