Removing
1. Remove the central part of the instrument panel and set the gear lever to the position (R).
2. Raise and secure the front of the vehicle.
3. Remove switch rod.
4. Remove the front and rear heater vent brackets. Remove the ventilation duct.
5. Disconnect the wire from the transmission mode switch.
6. Drill out the rivets securing the shift lever base plate to the floor. Remove the lever.
7. Inspect the lever for worn or damaged parts.
Installation
1. Install the shift lever and rivet its support plate with new rivets.
2. Connect the switch wire.
3. Install the remaining parts.
Visitor comments