Blower motor
Removing
1. Disconnect the negative battery cable.
2. Remove the glove box.
3. Disconnect the harness holder and ventilation ducts from the instrument panel.
4. Disconnect the hose from the vacuum block of the air recirculation valve. Remove the block.
5. Disconnect the connector from the blower motor resistor.
6. Remove the screws.
7. Remove motor and fan.
Installation
Installation is carried out in the reverse order of removal.
Series resistor
Removing
1. Disconnect the wire from the blower motor resistor.
2. Squeeze the latches and remove the resistor.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments