Ignition switch / steering column lock
See subsection 12.23.
Turn signal/wiper switch
Removal and installation
1. Unscrew the lever.
2. Loosen the fixing screws at the front.
3. Loosen the fixing screws from below.
4. Remove the lower trim panel of the steering column.
5. Remove the top panel of furnish of a steering column.
6. Remove the steering wheel.
7. Squeeze the mounting tabs and remove the switch.
8. Disconnect the connector.
9. Installation is carried out in the reverse order of removal.
Buttons on the instrument panel
Removal and installation
1. Insert the hook between the switch and trim panel and remove the switch.
2. Disconnect the connector.
3. Installation is carried out in the reverse order of removal.
Headlight and fog light switch
Removal and installation
1. Remove the end panel of furnish from the left side of the panel of devices.
2. Press out the locking tabs.
3. Remove the switch.
4. Installation is carried out in the reverse order of removal.
Hazard switch
Removal and installation
1. Remove the switch trim panel.
2. Hook up the switch and remove it.
3. Installation is carried out in the reverse order of removal.
Furnace fan switch
See subsection 4.8.
Stoplight switch
Removal and installation
1. Remove the trim panel under the instrument panel and disconnect the air pipe.
2. Disconnect the connection connector, squeeze the latches and remove the switch.
3. Installation is carried out in the reverse order of removal.
Interior light switch and trunk light switch
Removal and installation
1. Loosen the fixing screw and remove the switch.
2. Disconnect the connector.
3. Installation is carried out in the reverse order of removal.
Power window switches
See subsection 13.15.
Reversing light switch
Models with manual transmission
See subsection 9.1.6.
Models with automatic transmission
See subsection 9.1.6.
Visitor comments