Contents: Front interior lighting bulbs ⬇ Rear interior lighting bulbs ⬇ Trunk light bulb ⬇ Glove compartment light bulb ⬇ Light bulb on the door ⬇ Instrument cluster lighting bulbs ⬇ Headlight switch illumination ⬇ Clock/display light bulb ⬇ Interior Temperature Control Panel…⬇
Warning: When replacing light bulbs, try not to touch the glass of the light bulbs with your fingers.
Be careful not to burn yourself.
Use bulbs of the required wattage.
Front interior lighting bulbs
Replacement
1. Remove the diffuser.
2. Remove the corresponding light bulb.
3. Installation is carried out in the reverse order of removal.
Rear interior lighting bulbs
Replacement
1. Remove the light from the trim panel.
2. Take out the light bulb.
3. Installation is carried out in the reverse order of removal.
Trunk light bulb
Replacement
1. Remove the light from the trim panel.
2. Remove the light bulb.
3. Installation is carried out in the reverse order of removal.
Glove compartment light bulb
Replacement
1. Get out the flashlight.
2. Remove the light bulb.
3. Installation is carried out in the reverse order of removal.
Light bulb on the door
Replacement
1. Remove the light from the door.
2. Remove the protective screen.
3. Take out the light bulb.
4. Installation is carried out in the reverse order of removal.
Instrument cluster lighting bulbs
The lighting lamps are located in the center of the instrument panel, and the signal lamps are at the bottom.
Replacement
1. Remove the instrument panel.
2. Turn and remove the socket with the bulb. Remove the bulb.
3. Installation is carried out in the reverse order of removal.
Headlight switch illumination
Replacement
1. Remove the switch.
2. Remove the cartridge from the back of the switch.
3. Installation is carried out in the reverse order of removal.
Clock/display light bulb
Replacement
1. Remove the instrument panel.
2. Unscrew the socket with the light bulb and remove the light bulb.
3. Installation is carried out in the reverse order of removal.
Interior Temperature Control Panel Light Bulbs
Replacement
1. Remove the control panel.
2. Remove the corresponding light bulb from the back of the panel.
[Material copied from this portal: www.opelbook.ru]
3. Installation is carried out in the reverse order of removal.
Visitor comments