Headlights
Removing
1. Remove the grille.
2. Unscrew the fixing screws and remove the trim panel from the bottom of the headlight.
3. Disconnect the headlight connectors.
4. Loosen the top fixing screws.
5. Loosen the bottom fixing screws.
6. Remove headlight.
7. Remove the headlight drive, if necessary.
Installation
Installation is carried out in the reverse order of removal.
Front direction indicators
The direction indicators are removed together with the headlights.
Front fog lights
Removing
1. Remove the front bumper.
2. Loosen the three fixing screws (indicated by arrows) and remove the lamp.
3. Disconnect the connector.
Installation
Installation is carried out in the reverse order of removal.
Front side turn signal
See subsection 14.5.
Rear block headlight (on the trunk lid)
Removing
1. Remove the bulb holder.
2. Disconnect the connector.
3. Loosen the fixing nuts/screws.
4. Remove the headlight.
Installation
Installation is carried out in the reverse order of removal.
Rear block headlight (on the wing)
Removing
1. Remove the side trim panel in the luggage compartment.
2. Release the latch and remove the bulb holder.
3. Disconnect the connector.
4. Remove fixing nuts/screws (indicated by arrows) (on the left - models with a body type Sedan, on the right - models with a station wagon type)
5. Remove headlight (on the left - models with a body type Sedan, on the right - models with a station wagon type).
Installation
Installation is carried out in the reverse order of removal.
Visitor comments