2. To remove the replacement element, it is necessary to disconnect the air intake duct from the air cleaner housing (see resist. illustration) together with the mass air flow sensor installed on it, if necessary, disconnect the sensor wiring connector. Loosen the mounting bolts and remove the filter cover.
3. Remove the filter element, wipe the inside surfaces of the cover and air cleaner body with a dry rag, and install a new replacement element. Assembly is carried out in reverse order.
Attention: At the factory, the purifier air cover is fixed with self-tapping screws, they can be used no more than 10 times. If the cover is no longer tightly held on the air cleaner body, it is necessary to drill holes of a suitable diameter in the attachment points and use ordinary bolts with nuts to fasten the cover.
Visitor comments