1. Move the light filter back, open the sunroof glass halfway.
2. Turn away 4 bolts in a forward part of a glass pane of glass and remove a casing.
3. Turn away directing bolts on both parties of the panel.
4. Remove the glass panel. Check the condition of the hatch opening seal, replace the seal if necessary.
5. Installation is carried out in the reverse order. Adjust the position of the panel so that it is flush with the roof (underestimation of the front edge of the panel relative to the roof is allowed by no more than 1 mm, the permissible excess of the rear edge above the roof should not be more than 1 mm).
Visitor comments