Tightening torque with a torque wrench, Nm
- Drain plug - 45
- Bolts of branch pipes of the cooling system - 22
- Level indicator pipe nut - 20
- Clamping nut of the device for prohibiting the inclusion of a starter / switch of a light signal of a reverse gear - 25
- Nut of fastening of the switch of the starter prohibition device / reverse signal switch to the axis of the automatic transmission selector lever - 8
- Nut of fastening of the control lever to an axis of the selector — 16
- Selector cable clamp bolt - 6
- Screws for fastening the input / output shaft speed sensor - 6
- Coolant temperature sensor - 25
- Shield nuts (casing) coolant temperature sensor - 25
- Bolts of fastening of a driving disk to the hydrotransformer * — 50
- Bolts of a cover of a bell-shaped case of a transmission — 7
- Bolts of fastening of transmission to the engine — 75
- Bolts of fastening of transmission to a support transmission/engine — 60
- Bolts of fastening of knot of a support of transmission/engine to a body * — 65
* Installed new bolts
Visitor comments